Flexo Folder Gluer Parts
Flexo folder gluers rely on coordinated mechanical, electrical and controls systems throughout the feeder, print, slotter, die-cutting, folding and gluing sections.
Replacement parts may include:
- Feed rollers
- Bearings
- Shafts
- Gears and gearboxes
- Belts and pulleys
- Motors and drives
- Registration components
- Sensors and encoders
- Pneumatic cylinders
- Solenoid valves
- Folding components
- Glue-system components
- Electrical controls
- PLC components
- HMI hardware
- Safety devices
- Machine-specific assemblies
If the part failure is related to a larger equipment issue, our service team can also assist with troubleshooting, repair and modernization.
Learn more about our Flexo Folder Gluer Service and Upgrades.
Rotary Die Cutter Parts
Wear in rotary die cutting systems can affect sheet feeding, register, cutting quality, creasing and production consistency.
Parts support may include:
- Rollers and cylinders
- Bearings and bearing assemblies
- Shafts
- Gears
- Drive components
- Feed-system components
- Anvil-related components
- Cutting and creasing components
- Motors and drives
- Sensors and encoders
- Pneumatic components
- Electrical components
- PLC and controls hardware
- Safety-system components
Once the dedicated page is published, link this section to Rotary Die Cutter Service and Repair.
Bearings, Gears and Mechanical Components
Mechanical wear is one of the most common sources of reliability problems in older production equipment.
manroland Goss can assist with components such as:
- Ball bearings
- Roller bearings
- Needle bearings
- Bearing housings
- Bushings
- Gears
- Bevel gears
- Gearboxes
- Worm gears
- Shafts
- Couplings
- Clutches
- Pulleys
- Sprockets
- Chains
- Machine rollers
- Springs
- Mechanical assemblies
The company’s existing parts infrastructure already supports extensive categories of bearings, gears, motors, drives, rollers and mechanical components.
Motors, Drives and Controls Components
Electrical obsolescence can make older machinery increasingly difficult to maintain. Our parts and electrical teams can help identify replacement components or determine when a modernization project may be more practical.
Electrical and controls parts may include:
- AC drives
- DC drives
- Servo drives
- Motors
- Motor controllers
- PLC hardware
- Input/output modules
- HMI components
- Operator controls
- Power supplies
- Circuit boards
- Encoders
- Proximity switches
- Limit switches
- Sensors
- Frequency converters
- Relays
- Contactors
- Safety components
If an original component is obsolete, our engineering team may be able to recommend a replacement or retrofit solution.
Learn more about our Corrugated Machine Controls and PLC Upgrades.
Pneumatic Components
Corrugated converting equipment often depends on pneumatic systems for positioning, actuation, feeding and machine control.
Parts may include:
- Pneumatic cylinders
- Compact cylinders
- Air cylinders
- Solenoid valves
- Valve assemblies
- Regulators
- Actuators
- Fittings
- Air-control components
- Pneumatic repair kits
Our mechanical and controls specialists can also help troubleshoot recurring pneumatic problems when replacing the component alone does not resolve the issue.
Rollers and Wear Components
Rollers and other wear components can directly affect feeding, conveying, registration and finished-product quality.
Parts support may include:
- Feed rollers
- Pressure rollers
- Transfer rollers
- Conveyor rollers
- Rubber-covered rollers
- Roller bearings
- Roller shafts
- Pulleys
- Belts
- Wear strips
- Guides
- Machine-specific wear components
Where appropriate, worn components may also be rebuilt or refurbished rather than replaced.
Learn more about our Corrugated Equipment Rebuilds and Retrofits.
Parts for Conveying and Material Handling Equipment
Corrugated production does not end at the converting machine. Conveyors, stackers, bundlers and palletizing systems are also critical to keeping product moving through the plant.
Parts support may be available for:
- Conveyors
- Stackers
- Bundlers
- Palletizers
- Feeders
- Material-handling systems
- Finishing equipment
Components may include motors, drives, belts, bearings, rollers, sensors, pneumatic components and controls hardware.
Help Identifying Hard-to-Find Parts
Older machines often present a different challenge: the part number is missing, the manufacturer no longer supports the equipment or the original component has been discontinued.
manroland Goss can help customers identify parts using available information such as:
- Equipment manufacturer
- Machine model
- Serial number
- Existing part number
- Component manufacturer
- Electrical specifications
- Dimensions
- Photos of the existing component
- Equipment manuals
- Assembly drawings
- Bills of materials
- Application information
The company’s established parts operation also has access to documentation and technical resources that can assist with part identification and support for legacy equipment.
Obsolete Corrugated Machine Parts
When a component is obsolete, the solution may not be as simple as finding another identical part.
Depending on the system, options may include:
- Locating remaining replacement inventory
- Identifying an equivalent component
- Repairing or rebuilding the existing part
- Manufacturing a replacement component
- Updating the assembly
- Replacing an obsolete drive
- Migrating an outdated PLC
- Modernizing the affected control system
Our parts, service and engineering teams can work together to determine the most practical solution.
Custom and Engineered Replacement Parts
Some corrugated equipment components are proprietary, discontinued or no longer commercially available.
Where appropriate, manroland Goss may be able to assist with:
- Reverse-engineered components
- Custom-machined parts
- Replacement shafts
- Rollers
- Brackets
- Mechanical assemblies
- Obsolete component replacements
- Modified parts for equipment upgrades
Existing drawings, sample components and equipment information can help determine whether a custom solution is practical.
Parts Support for Older Corrugated Equipment
Many corrugated plants continue operating equipment that has provided reliable service for decades. Maintaining these machines often depends on access to knowledgeable parts and service resources.
Our team can help evaluate:
- Repeated component failures
- Obsolete parts
- Difficult-to-source components
- Parts needed for planned shutdowns
- Recommended critical spares
- Components required for rebuilds
- Controls obsolescence
- Long-term replacement planning
This allows parts sourcing to become part of a larger equipment reliability strategy instead of simply reacting to failures.
Planned Maintenance and Critical Spare Parts
Waiting for a machine failure before identifying replacement parts can create unnecessary downtime.
For critical equipment, manufacturers may benefit from identifying frequently replaced or long-lead-time components in advance.
Potential critical spares may include:
- Bearings
- Motors
- Drives
- Encoders
- PLC components
- Power supplies
- Sensors
- Pneumatic valves
- Cylinders
- Belts
- Rollers
- Machine-specific assemblies
Our service team can also identify wear items during planned inspections.
Learn more about Corrugated Equipment Repair and Maintenance.
More Than Parts
Sometimes a failed component is a symptom rather than the underlying problem.
manroland Goss can combine parts support with:
- Mechanical troubleshooting
- Electrical troubleshooting
- Preventive maintenance
- Machine alignment
- Controls diagnostics
- Rebuilds
- Retrofits
- Equipment relocation
- Installation
- Startup and commissioning
The mechanical and electrical corrugated support pages already position the company to assist with broader equipment issues beyond simple component replacement.
Why Choose manroland Goss for Corrugated Machine Parts?
Customers can rely on manroland Goss for:
- Extensive industrial parts sourcing capabilities
- Mechanical and electrical expertise
- Support for equipment from multiple manufacturers
- Hard-to-find and obsolete component assistance
- Custom and engineered replacement solutions
- Controls and drive expertise
- Parts identification support
- Rebuild and retrofit capabilities
- 24/7 parts and service support
- A technical team that understands how the component functions within the machine
manroland Goss already maintains a substantial parts operation serving printing, packaging, converting and industrial manufacturing customers, including off-the-shelf and custom components.
Frequently Asked Questions
What types of corrugated machine parts can manroland Goss supply?
Parts support may include mechanical, electrical, controls and pneumatic components such as bearings, rollers, shafts, gears, motors, drives, PLC hardware, sensors, cylinders and valves.
Do you supply flexo folder gluer parts?
Yes. Parts support may be available for feeder, print, slotter, die-cutting, folding, gluing, electrical and controls systems.
Can you supply rotary die cutter parts?
Yes. Depending on the equipment, our team may be able to assist with mechanical, electrical, drive, controls and wear components for rotary die cutting equipment.
Do you support equipment from manufacturers other than manroland Goss?
Yes. manroland Goss provides parts and service support across multiple equipment manufacturers. Availability depends on the specific machine and component.
Can you help identify a part if we do not know the part number?
Yes. Photos, machine information, dimensions, manufacturer markings, manuals and existing documentation can often help with identification.
What if the original part is obsolete?
Our team can evaluate alternative components, rebuild options, custom replacement parts or engineered modernization when an exact replacement is unavailable.
Can you manufacture custom replacement parts?
In some applications, yes. Our team can evaluate drawings, samples and equipment requirements to determine whether a custom or reverse-engineered component is appropriate.
Do you offer emergency parts support?
Yes. manroland Goss currently provides 24/7 parts and service support.
Automatic corrugated cardboard sheet feeding and folding process on a tech packaging production line in a factory
Request a Corrugated Machine Part
To help us identify the right component, provide as much information as possible, including:
- Equipment manufacturer
- Machine model
- Serial number
- Part number, if available
- Component manufacturer
- Photos
- Electrical or dimensional specifications
- Description of the equipment problem
Our team can review the information and help determine the next step.
Contact Our Corrugated Equipment Team
